350vip葡京新集团首页莅临-在线入口网站

   R & D Capacity

Fuzhou Taigene Industry Co., Ltd. Experiment Ability Sheet.

NO Name No. Capacity Functions Equipment
1 Universal Material Testing Machine E-E-022

Max Tension Force: 5,000 kgs

Precision: ±1%

Material tensile force and pullout force test
2 True Cylindricity Meter E-E-114

Precision:

Radial direction:(0.065+6H/10000)μm

Axial direction:(0.05+6H/10000)μm

True roundness test, true cylindricity test etc.
3 CMM E-E-055

Max precision:±(1.8+L/300)μm

Measure Range:

X:700mm

Y:1000mm

Z:600mm

Accurately check spare parts dimensions.
4 Cleanliness Measurement System E-E-059 E-E-059 0.75~11.5*10 times micron pixel Analyze abnormal subjects..
5 CMM E-E-113

Max precision: ±(1.5+L/350)μm

Measure Range:

X:700mm

Y:1000mm

Z:600mm

Accurately check spare parts dimensions.
6 Mirco Projector E-E-075

Max projection multiple: 200 times.

Measure Range:

X:300mm

Y:200mm

Accurately check spare parts dimensions.
7 Bearing Vibration Measuring Instrument E-E-072 Can measure 608、6000、6200 bearings noise. Bearing noise test.
8 X-Ray E-E-071 Min. diameter:φ0.13mm Observe the porosity of casting.
9 Hardness Tester E-E-054 HV45~HV940 harness test can be done. Hardness test on spare parts.
10 Baking Oven E-E-144 Normal temp.~180℃ Test in high temp.
11 Metallographic Precision Cutting Machine E-E-159 Max cutting diameter: 230mm Sample cutting
12 Metallographic Specimen Embedding Machine E-E-160 Inlay diameter 40mm Sample embedding
13 Metallographic Specimen Grinder E-E-161 Disc diameter 200 mm, 660 RPM Max The sample is grounded after embedding
14 Hot & Cold Shock Testing Machine E-E-162

Impact temp. under high temp..: (+ 60 ~ 150) ℃

Impact temp. under low temp...: (- 60 ~ 0) ℃

Test sample under cold and hot temp. shock.
15 Constant Temp. & Humidity Testing Machine E-E-163

Temp.: (- 45 ~ 125) ℃

Humidity: RH 10% ~ 98%

Temp. rise and fall speed: ≤ 1 ℃ / min

Test under temp. and humidity cycle.
16 Salt Spray Testing Machine E-E-167

Lab temp. range (normal temp. ~ 50 ℃)

The temp. range of salt atomization pool can be set (normal temp. ~ 50 ℃)

Temp. range of saturated barrel (normal temp. ~ 63 ℃)

Salt spray volume: (0.5 - 3) ml can be set.

Electroplating / powder coating

Salt spray test

17 Electronic Balance E-W-122 Range: 0.0001-120g Weight test
18 Stereo Microscope E-E-171 Max magnification 125x Observation of sample morphology
19

Precision Type

Universal Material Testing Machine

E-E-208

Measure range: 0 ~ 2000N

Effective test range: 0.4% - 80%

Load accuracy: ± 1%

Part stretch

Pull out force test

20 Constant Temp. & Humidity + Mechanism E-E-186

Temp.: (- 45 ~ 125) ℃

Humidity: RH 10% ~ 98%

Temp. rise and fall speed: ≤ 1 ℃ / min

Temp. and humidity cycle test
Baidu
sogou